原贴
http://forum.xda-developers.com/showthread.php?t=294113
内容：
Attached is a first release of a gps proxy driver. The driver goes in between the RIL and serial command to allow another incoming connection. To install import reg keys, copy the driver over to windows, restart and manualy start the ports. COM6 first then RIL. The driver is not signed so you will need to manually start it, TaskMgr works good for this. This is intentional until it tested.
After installation and starting the devices. Connect to COM6 with your terminal app or gps software and the gps stream will start. If it doesn't start the first time, try closing then reopening the connection.
The GPS information is parsed out of the stream for the GPS connection and the radio data is parsed out for the RIL.
A GPS radio stack is required.
Please report any errors, and only use this if you know what your doing. If your concerned about doing a hard reset, dont use this. I have not had to.
This is experimental.
,Dave
我的英文不好，只能明白一些东西，可能有翻译错误.另外我是新手，所以有些术语都不怎么会.
附件里面是相关gps段口的驱动.设备运行RIL和连接命令之间的一个信息输入通道.拷贝覆盖注册表信息，然后重新启动系统（应该是硬启动），设置com6断口优先ril开启.设备并没有被登记所以你必须手动控制它的运行.你可以使用TaskMgr进行控制.你必须完成以上步骤，在你测试gps功能之前.
在完成安装之后，重起设备.用你的gps软件连接com6断口.你会发现gps模块已经开启了.如果第一次没有成功开启的话，可以尝试重新连接.
后面不知道怎么翻译：大体上是说gps是通过steam和radio date实现功能的.另外需要一个gps radio stack.顺便把相关的软件我也已经发上来.附件里面是reg修改的一些东西.
enjoy it
ftp://xda:xda@ftp.xda-developers.com/Uploads/Hermes/1.35.00.11(GPS-enabled)Trinity2Hermes_RadioRom.rar
ftp://xda:xda@ftp.xda-developers.com/Uploads/Hermes/1.35.00.11RadioOnly(GPS-Enabled)Trinity2Hermes-SSPL-comp.zip
[file]attachment/1172359870_0.zip[/file]